Juniper SRX Series User Manual

• 1-Port Gigabit Ethernet SFP Mini-Physical Interface Module Network Interface
Specifications on page 19
• 1-Port Gigabit Ethernet SFP Mini-Physical Interface Module Supported Modules on
page 36
• 1-Port Gigabit Ethernet SFP Mini-Physical Interface Module LEDs on page 35
• 1-Port Gigabit Ethernet SFP Mini-Physical Interface Module Basic Configuration on
page 205
1-Port Gigabit Ethernet SFP Mini-Physical Interface Module Key Features
The 1-Port Gigabit Ethernet small form-factor pluggable Mini-Physical Interface Module
(SFP Mini-PIM) has the following key features:
•
Supports hot-swappable transceivers
•
Real-time visual status of connectivity and traffic flows
•
Provides Link Up/Down alarm
•
Half-duplex/full-duplex support
•
Autonegotiation
CAUTION: If you are having a problem running a Juniper Networks device
that is using a third-party optic or cable, the Juniper Networks Technical
Assistance Center (JTAC) can help you diagnose the source of the problem.
Your JTAC engineer might recommend that you check the third-party optic
or cable and potentially replace it with an equivalent Juniper Networks optic
or cable that is qualified for the device.
Related
Documentation
1-Port Gigabit Ethernet SFP Mini-Physical Interface Module Overview on page 33•
• 1-Port Gigabit Ethernet SFP Mini-Physical Interface Module Hardware Specifications
on page 35
• 1-Port Gigabit Ethernet SFP Mini-Physical Interface Module Network Interface
Specifications on page 19
• 1-Port Gigabit Ethernet SFP Mini-Physical Interface Module Supported Modules on
page 36
• 1-Port Gigabit Ethernet SFP Mini-Physical Interface Module LEDs on page 35
• 1-Port Gigabit Ethernet SFP Mini-Physical Interface Module Basic Configuration on
page 205
Copyright © 2015, Juniper Networks, Inc.34
SRX Series Services Gateways for the Branch Physical Interface Modules Reference

Juniper SRX Series Specifications

General

Brand	Juniper
Model	SRX Series
Category	Gateway
Language	English