device. The 2-Port 10-Gigabit Ethernet XPIM also provides effective MPLS/GRE
termination of customer traffic with reasonable performance.
NOTE: Only the SRX650 Services Gateway supports hot-swappable
functionality for GPIMs. The SRX550 Services Gateway does not support
hot-swappable functionality for GPIMs.
Figure 19 on page 84 shows the 2-Port 10-Gigabit Ethernet XPIM.
Figure 19: 2-Port 10-Gigabit Ethernet XPIM
Related
Documentation
2-Port 10-Gigabit Ethernet XPIM Key Features on page 86•
• 2-Port 10-Gigabit Ethernet XPIM Hardware Specifications on page 88
• 2-Port 10-Gigabit Ethernet XPIM LEDs on page 89
• 2-Port 10-Gigabit Ethernet XPIM Components on page 84
• 2-Port 10-Gigabit Ethernet XPIM Basic Configuration on page 223
• Installing a Gigabit-Backplane Physical Interface Module on the SRX Series Services
Gateway on page 256
2-Port 10-Gigabit Ethernet XPIM Components
The 2-Port 10 Gigabit Ethernet XPIM contains the components listed in
Table 45 on page 84.
Table 45: 2-Port 10 Gigabit Ethernet XPIM Components
DescriptionLocationComponent
Use the XPIM
ONLINE/OFFLINE button to
gracefully shut down the XPIM.
Right side of the XPIMXPIM ONLINE/OFFLINE button
Only the SRX650 Services
Gateway supports
hot-swappable functionality
for GPIMs. The SRX550
Services Gateway does not
support hot-swappable
functionality for GPIMs.
Copyright © 2015, Juniper Networks, Inc.84
SRX Series Services Gateways for the Branch Physical Interface Modules Reference
To Next Page
Loading...
Need help?
General
