2-Port 10-Gigabit Ethernet XPIM Hardware Specifications
The 2-Port 10-Gigabit Ethernet XPIM has the hardware specifications listed in
Table 47 on page 88.
Table 47: 2-Port 10-Gigabit Ethernet XPIM Hardware Specifications
ValueDescription
.78 in. H x 6.72 in. W x 8.01 in. L
(1.98 cm x 17.08 cm x 20.57 cm)
Dimensions (H x W x L)
18.6 oz (.53 kg)Weight
Contains a total of four ports:
•
Two SFP+ fiber ports
•
Two 10 G Base-T copper ports
Port 0 is grouped as one copper port and one
fiber port, and port 1 is grouped as one copper
port and one fiber port. Mixing and matching
between the copper and fiber ports is
supported.
Connector Types
Receives SFP+ optics and, at a minimum,
supports these SFP+ transceivers:
•
SFPP-10GE-SR
•
SFPP-10GE-LR
•
SFPP-10GE-ER
•
SFPP-10GE-LRM
•
Copper Twin-AX 1m
•
Copper Twin-AX 3m
Supported SFPs
Single-high, single-wide XPIMForm factor
32°F through 104°F (0°C through 40°C)Environmental operating temperature
–40°F through 158°F (–40°C through 70°C)Storage temperature
5% to 90% noncondensingRelative humidity
Estimated at 20 WPower consumption
7.5 Gbps across two ports in routed modeThroughput
Related
Documentation
2-Port 10-Gigabit Ethernet XPIM Overview on page 83•
• 2-Port 10-Gigabit Ethernet XPIM Key Features on page 86
• 2-Port 10-Gigabit Ethernet XPIM LEDs on page 89
Copyright © 2015, Juniper Networks, Inc.88
SRX Series Services Gateways for the Branch Physical Interface Modules Reference
To Next Page
Loading...
Need help?
General
