Juniper SRX Series User Manual

Table 39: 1-Port VDSL2 (Annex A) Mini-PIM Hardware Specifications
ValueDescription
3.75 in. x 5.9 in. x 0.80 in.
(9.5 cm x 14.5 cm x 2.0 cm)
Dimensions (H x W x L)
4.0 oz (114 g)Weight
RJ-11Connector type
Mini-PIMForm factor
32°F through 113°F (0°C through 45°C)Environmental operating temperature
–40°F through 158°F (–40°C through 70°C)Storage temperature
5% to 90% noncondensingRelative humidity
Related
Documentation
1-Port VDSL2 (Annex A) Mini-Physical Interface Module Overview on page 71•
• 1-Port VDSL2 (Annex A) Mini-Physical Interface Module Key Features on page 72
• 1-Port VDSL2 (Annex A) Mini-Physical Interface Module Supported Profiles on page 74
• 1-Port VDSL2 (Annex A) Mini-Physical Interface Module LEDs on page 73
• 1-Port VDSL2 (Annex A) Mini-Physical Interface Module Cable Specifications on page 141
• 1-Port VDSL2 (Annex A) Mini-Physical Interface Module Basic Configuration on page 217
1-Port VDSL2 (Annex A) Mini-Physical Interface Module LEDs
The 1-Port VDSL2 (Annex A) Mini-Physical Interface Module (Mini-PIM) has two LEDs.
Table 40 on page 73 describes the LED states.
Table 40: 1-Port VDSL2 (Annex A) Mini-PIM LED States
DescriptionStateColorLED
Indicates that the VDSL interface is trained.OnGreenSYNC
Indicates training is in progress.Blinking
Indicates that traffic is passing through.BlinkingGreenTX/RX
Indicates that no traffic is passing through.Off
Related
Documentation
1-Port VDSL2 (Annex A) Mini-Physical Interface Module Overview on page 71•
• 1-Port VDSL2 (Annex A) Mini-Physical Interface Module Key Features on page 72
• 1-Port VDSL2 (Annex A) Mini-Physical Interface Module Supported Profiles on page 74
73Copyright © 2015, Juniper Networks, Inc.
Chapter 10: 1-Port VDSL2 (Annex A) Mini-Physical Interface Module

Juniper SRX Series Specifications

General

Brand	Juniper
Model	SRX Series
Category	Gateway
Language	English