Juniper SRX Series User Manual

• V.35 DTE Cable Pinouts for the 8-Port Serial Gigabit-Backplane Physical Interface
Module on page 194
• V.35 DCE Cable Pinouts for the 8-Port Serial Gigabit-Backplane Physical Interface
Module on page 190
• X.21 DTE Cable Pinouts for the 8-Port Serial Gigabit-Backplane Physical Interface
Module on page 199
• X.21 DCE Cable Pinouts for the 8-Port Serial Gigabit-Backplane Physical Interface
Module on page 197
EIA-530A DCE Cable Pinouts for 8-Port Serial Gigabit-Backplane Physical Interface
Module
Table 96 on page 179 gives the EIA-530A DCE cable pinouts for 8-Port Serial
Gigabit-Backplane Physical Interface Module (GPIM).
Table 96: EIA-530A DCE Cable Pinouts for the 8-Port Serial GPIM
DescriptionPairingPair
Dir
Output
(O)
and
Input
(I)
DB-25 (2)
Pin
DB-25 (1)
Pin
VHDCI-68
Pin
Shield Ground-1T33
Receive Data
(A)
T39Pair 1I2T41
Send Data (A)T14Pair 3O3T16
Clear to Send
(A)
T40Pair 4I4T42
Request to Send
(A)
T48Pair 5O5T50
Terminal Ready
(A)
O6T49
Shield Ground7T37
Receive Ready
(A)
T44Pair 6O8T46
Terminal Timing
(B)
T4Pair 7O9T2
179Copyright © 2015, Juniper Networks, Inc.
Chapter 24: Serial Gigabit-Backplane Physical Interface Module Cable Specifications

Juniper SRX Series Specifications

General

Brand	Juniper
Model	SRX Series
Category	Gateway
Language	English