Juniper SRX Series User Manual

• 1-Port ADSL2+ Mini-Physical Interface Module Basic Configuration on page 209
1-Port ADSL2+ Mini-Physical Interface Module Hardware Specifications
Table 29 on page 47 gives the physical specifications of the 1-Port ADSL2+ Mini-Physical
Interface Module (Mini-PIM).
Table 29: 1-Port ADSL2+ Mini-PIM Specifications
ValueDescription
3.75 in. x 5.9 in. x 0.80 in.
(9.5 cm x 14.5 cm x 2.0 cm)
Dimensions (H x W x L)
2.72 oz (77 g)Weight
RJ-11Connector type
Mini-PIMForm factor
32°F through 104°F (0°C through 40°C)Environmental operating temperature
–40°F through 158°F (–40°C through 70°C)Storage temperature
5% to 90% noncondensingRelative humidity
Related
Documentation
1-Port ADSL2+ Mini-Physical Interface Module Overview on page 45•
• 1-Port ADSL2+ Mini-Physical Interface Module Network Interface Specifications on
page 21
• 1-Port ADSL2+ Mini-Physical Interface Module Supported Standards on page 48
• 1-Port ADSL2+ Mini-Physical Interface Module Key Features on page 46
• 1-Port ADSL2+ Mini-Physical Interface Module LEDs on page 47
• 1-Port ADSL2+ Mini-Physical Interface Module Supported Loopback Diagnostics on
page 49
• 1-Port ADSL2+ Mini-Physical Interface Module Basic Configuration on page 209
1-Port ADSL2+ Mini-Physical Interface Module LEDs
The 1-Port ADSL2+ Mini-Physical Interface Module (Mini-PIM) has two LEDs.
Table 30 on page 48 describes the LED states.
47Copyright © 2015, Juniper Networks, Inc.
Chapter 5: 1-Port ADSL2+ Mini-Physical Interface Module

Juniper SRX Series Specifications

General

Brand	Juniper
Model	SRX Series
Category	Gateway
Language	English