Juniper SRX Series User Manual

• 1-Port DOCSIS Mini-Physical Interface Module Basic Configuration on page 211
1-Port DOCSIS Mini-Physical Interface Module Hardware Specifications
Table 31 on page 53 lists the hardware specifications of the Data over Cable System
Interface Specifications Mini-Physical Interface Module (1-Port DOCSIS Mini-PIM).
Table 31: 1-Port DOCSIS Mini-PIM Hardware Specifications
ValueDescription
0.80 in. x 3.75 in. x 5.9 in.
(2.0 cm x 9.5 cm x 14.5 cm)
Dimensions (H x W x L)
4.40 oz (125 g)Weight
F-Type coaxial connectorConnector type
Mini-PIMForm factor
32°F through 104°F (0°C through 40°C)Environmental operating temperature
–40°F through 158°F (–40°C through 70°C)Storage temperature
5% to 90% noncondensingRelative humidity
Related
Documentation
1-Port DOCSIS Mini-Physical Interface Module Overview on page 51•
• 1-Port DOCSIS Mini-Physical Interface Module Key Features on page 52
• 1-Port DOCSIS Mini-Physical Interface Module Supported Standards on page 55
• 1-Port DOCSIS Mini-Physical Interface Module Network Interface Specifications on
page 22
• 1-Port DOCSIS Mini-Physical Interface Module LEDs on page 53
• 1-Port DOCSIS Mini-Physical Interface Module Basic Configuration on page 211
1-Port DOCSIS Mini-Physical Interface Module LEDs
The Data over Cable System Interface Specifications Mini-Physical Interface Module
(1-Port DOCSIS Mini-PIM) has five LEDs. Figure 11 on page 54 describes the LEDs on the
1-Port DOCSIS Mini-PIM.
53Copyright © 2015, Juniper Networks, Inc.
Chapter 6: 1-Port DOCSIS Mini-Physical Interface Module

Juniper SRX Series Specifications

General

Brand	Juniper
Model	SRX Series
Category	Gateway
Language	English