Juniper SRX Series User Manual

Figure 9: ADSL2+ Annex B Mini-PIM Front Panel
g037525
Related
Documentation
1-Port ADSL2+ Mini-Physical Interface Module Hardware Specifications on page 47•
• 1-Port ADSL2+ Mini-Physical Interface Module Network Interface Specifications on
page 21
• 1-Port ADSL2+ Mini-Physical Interface Module Supported Standards on page 48
• 1-Port ADSL2+ Mini-Physical Interface Module Key Features on page 46
• 1-Port ADSL2+ Mini-Physical Interface Module LEDs on page 47
• 1-Port ADSL2+ Mini-Physical Interface Module Supported Loopback Diagnostics on
page 49
• 1-Port ADSL2+ Mini-Physical Interface Module Basic Configuration on page 209
1-Port ADSL2+ Mini-Physical Interface Module Key Features
The 1-Port ADSL2+ Mini-Physical Interface Module (Mini-PIM) provides the following
key features:
•
Automatic configuration of the ADSL after negotiating with the DSLAM
•
Support for ADSL, ADSL 2, and ADSL2+ protocols on the same interface card
•
Dying Gasp support
•
MLPPP on one interface
•
Asynchronous Transfer Mode (ATM) Adaptation Layer 5 (AAL5) encapsulation
•
Support of latency modes fast and interleave
•
Support for ATM AAL5 with CBR, VBR-nrt and UBR traffic types
•
Support for 10 permanent virtual circuits (PVCS)
Related
Documentation
1-Port ADSL2+ Mini-Physical Interface Module Overview on page 45•
• 1-Port ADSL2+ Mini-Physical Interface Module Hardware Specifications on page 47
• 1-Port ADSL2+ Mini-Physical Interface Module Network Interface Specifications on
page 21
• 1-Port ADSL2+ Mini-Physical Interface Module Supported Standards on page 48
• 1-Port ADSL2+ Mini-Physical Interface Module LEDs on page 47
• 1-Port ADSL2+ Mini-Physical Interface Module Supported Loopback Diagnostics on
page 49
Copyright © 2015, Juniper Networks, Inc.46
SRX Series Services Gateways for the Branch Physical Interface Modules Reference

Juniper SRX Series Specifications

General

Brand	Juniper
Model	SRX Series
Category	Gateway
Language	English