CHAPTER 3
1-Port Gigabit Ethernet SFP Mini-Physical
Interface Module
•
1-Port Gigabit Ethernet SFP Mini-Physical Interface Module Overview on page 33
•
1-Port Gigabit Ethernet SFP Mini-Physical Interface Module Key Features on page 34
•
1-Port Gigabit Ethernet SFP Mini-Physical Interface Module Hardware
Specifications on page 35
•
1-Port Gigabit Ethernet SFP Mini-Physical Interface Module LEDs on page 35
•
1-Port Gigabit Ethernet SFP Mini-Physical Interface Module Supported
Modules on page 36
1-Port Gigabit Ethernet SFP Mini-Physical Interface Module Overview
The 1-Port Gigabit Ethernet small form-factor pluggable Mini-Physical Interface Module
(SFP Mini-PIM) provides connectivity to a single Gigabit Ethernet device or to a network.
The 1-Port Gigabit Ethernet SFP Mini-PIM complements the on-board 10/100/1000 Mbps
Ethernet interfaces with extended LAN or WAN connectivity. It offers support for a variety
of transceivers. This Mini-PIM can be used in copper and optical environments to provide
maximum flexibility when upgrading from an existing infrastructure to Metro Ethernet.
Figure 6 on page 33 shows the front panel of the Gigabit Ethernet 1-Port SFP Mini-PIM.
Figure 6: 1-Port Gigabit Ethernet SFP Mini-PIM Front Panel
Related
Documentation
1-Port Gigabit Ethernet SFP Mini-Physical Interface Module Hardware Specifications
on page 35
•
• 1-Port Gigabit Ethernet SFP Mini-Physical Interface Module Key Features on page 34
33Copyright © 2015, Juniper Networks, Inc.