Juniper SRX Series User Manual

Table 34: 1-Port G.SHDSL Mini-PIM LED States (continued)
DescriptionStateColorName
Link is activeOnGreenLINK
NOTE: There are four
LINK LEDs available
on the G.SHDSL
Mini-PIM. Each LED
provides the link
status of the wire pair.
Data communication is taking placeBlinking
Link is inactiveOff
Related
Documentation
1-Port G.SHDSL 8-Wire Mini-Physical Interface Module Overview on page 57•
• 1-Port G.SHDSL 8-Wire Mini-Physical Interface Module Supported Standards on page 60
• 1-Port G.SHDSL 8-Wire Mini-Physical Interface Module Operating Modes on page 241
• 1-Port G.SHDSL 8-Wire Mini-Physical Interface Module Key Features on page 58
• 1-Port G.SHDSL 8-Wire Mini-Physical Interface Module Hardware Specifications on
page 59
• 1-Port G.SHDSL 8-Wire Mini-Physical Interface Modules Basic Configuration
1-Port G.SHDSL 8-Wire Mini-Physical Interface Module Supported Standards
The 1-Port G.SHDSL 8-Wire Mini-Physical Interface Module (Mini-PIM) complies with
the following standards:
•
ITU-T G.991.2—Symmetric high-speed digital subscriber line (SHDSL) transceiver
•
ITU-T G.994.1—Handshake procedures for digital subscriber line (DSL) transceivers (3
LC Comment)
•
ITU-T G.997.1—Physical layer management for DSL transceivers
Related
Documentation
• 1-Port G.SHDSL 8-Wire Mini-Physical Interface Module Overview on page 57
• 1-Port G.SHDSL 8-Wire Mini-Physical Interface Module Operating Modes on page 241
• 1-Port G.SHDSL 8-Wire Mini-Physical Interface Module Key Features on page 58
• 1-Port G.SHDSL 8-Wire Mini-Physical Interface Module Hardware Specifications on
page 59
• 1-Port G.SHDSL 8-Wire Mini-Physical Interface Module LEDs on page 59
Copyright © 2015, Juniper Networks, Inc.60
SRX Series Services Gateways for the Branch Physical Interface Modules Reference

Juniper SRX Series Specifications

General

Brand	Juniper
Model	SRX Series
Category	Gateway
Language	English