Table 10: MTU Values for ADSL2+ Mini-PIM (Encapsulation), VDSL-
Mini-PIM AT mode (Encapsulation), and G.SHDSL Mini-PIM
(Encapsulation) (continued)
Maximum MTU
(Bytes)
Logical Interface
MTU
(Bytes)–Default
Physical Interface
MTU
(Bytes)–DefaultMini-PIM
VDSL- Mini-PIM AT mode (Encapsulation)
151415061514atm-snap
151415141514atm-vcmux
151415101514atm-nlpid
151415121514atm-cisco-nlpid
152414901514ether-over-atm-llc
151415081514atm-ppp-llc
151415121514atm-ppp-vcmux
151415001514atm-mlppp-llc
151414821514ppp-over-ether-over-atm-llc
151415001514VDSL- Mini-PIM PT
mode
G.SHDSL Mini-PIM (Encapsulation)
448244704482atm-snap
448244704482atm-vcmux
448244704482atm-nlpid
448244704482atm-cisco-nlpid
448215004482ether-over-atm-llc
448244764482atm-ppp-llc
448244804482atm-ppp-vcmux
15Copyright © 2015, Juniper Networks, Inc.
Chapter 1: SRX Series Services Gateway Interface Modules Support