Juniper SRX Series User Manual

Table 25: Supported 1-Port Gigabit Ethernet SFP Mini-Physical Interface
Modules (continued)
Cable
Connector Type (SFP
Transceiver)Juniper Product Number
LC100Base-BX Fast Ethernet Optics,
at 20 km (TX 1310 nm / RX 1550
nm)
EX-SFP-FE20KT13R15
LC100Base-BX Fast Ethernet Optics,
at 20 km (TX 1550 nm / RX 1310
nm)
EX-SFP-FE20KT15R13
LC1000BASE-BX, at 40 km (TX1310
nm / 1550 nm)
EX-SFP-GE40KT13R15
LC1000BASE-BX, at 40 km (TX1550
nm / RX1310 nm)
EX-SFP-GE40KT15R13
CAUTION: If you are having a problem running a Juniper Networks device
that is using a third-party optic or cable, the Juniper Networks Technical
Assistance Center (JTAC) can help you diagnose the source of the problem.
Your JTAC engineer might recommend that you check the third-party optic
or cable and potentially replace it with an equivalent Juniper Networks optic
or cable that is qualified for the device.
Related
Documentation
• 1-Port Gigabit Ethernet SFP Mini-Physical Interface Module Overview on page 33
• 1-Port Gigabit Ethernet SFP Mini-Physical Interface Module Hardware Specifications
on page 35
• 1-Port Gigabit Ethernet SFP Mini-Physical Interface Module Network Interface
Specifications on page 19
• 1-Port Gigabit Ethernet SFP Mini-Physical Interface Module Key Features on page 34
• 1-Port Gigabit Ethernet SFP Mini-Physical Interface Module LEDs on page 35
• 1-Port Gigabit Ethernet SFP Mini-Physical Interface Module Basic Configuration on
page 205
37Copyright © 2015, Juniper Networks, Inc.
Chapter 3: 1-Port Gigabit Ethernet SFP Mini-Physical Interface Module

Juniper SRX Series Specifications

General

Brand	Juniper
Model	SRX Series
Category	Gateway
Language	English