Juniper SRX Series User Manual

Table 28: 1-Port SFP Mini-Physical Interface Modules (continued)
ConnectorInterface TypeProduct Number
CAT-5e1000BASE-T, Copper TransceiverJX-SFP-1GE-T
SRX-SFP-1GE-T
LC1000BASE-BX, at 10 km (TX1310
nm / RX1490 nm)
EX-SFP-GE10KT13R14
LC1000BASE-BX, at 10 km (TX1310
nm / RX1550 nm)
EX-SFP-GE10KT13R15
LC1000BASE-BX, at 10 km (TX1490
nm / RX1310 nm)
EX-SFP-GE10KT14R13
LC1000BASE-BX, at 10 km (TX1550
nm / RX1310 nm)
EX-SFP-GE10KT15R13
LC100BASE-BX Fast Ethernet
Optics, at 20 km (TX 1310 nm /
RX 1550 nm)
EX-SFP-FE20KT13R15
LC100BASE-BX Fast Ethernet
Optics, at 20 km (TX 1550 nm /
RX 1310 nm)
EX-SFP-FE20KT15R13
LC1000BASE-BX, at 40 km (TX1310
nm / 1550 nm)
EX-SFP-GE40KT13R15
LC1000BASE-BX, at 40 km (TX1550
nm / RX1310 nm)
EX-SFP-GE40KT15R13
CAUTION: If you are having a problem running a Juniper Networks device
that is using a third-party optic or cable, the Juniper Networks Technical
Assistance Center (JTAC) can help you diagnose the source of the problem.
Your JTAC engineer might recommend that you check the third-party optic
or cable and potentially replace it with an equivalent Juniper Networks optic
or cable that is qualified for the device.
Related
Documentation
• 1-Port SFP Mini-Physical Interface Module Overview on page 39
• 1-Port SFP Mini-Physical Interface Module Hardware Specifications on page 41
• 1-Port SFP Mini-Physical Interface Module Network Interface Specifications on page 20
• 1-Port SFP Mini-Physical Interface Module Key Features on page 40
• 1-Port SFP Mini-Physical Interface Module LEDs on page 41
• 1-Port SFP Mini-Physical Interface Module Basic Configuration on page 208
43Copyright © 2015, Juniper Networks, Inc.
Chapter 4: 1-Port SFP Mini-Physical Interface Module

Juniper SRX Series Specifications

General

Brand	Juniper
Model	SRX Series
Category	Gateway
Language	English