Mitsubishi FX3U Series User Manual

FX3U Series Programmable Controllers
User’s Manual - Hardware Edition
359
19 FX3U-7DM (Display Module)
19.7 Monitor/Test Mode [Excluding User-Registered Devices]
11
High-Speed Counters
12
Output Wiring
13
Wiring for Various Uses
14
Test Run, Maintenance, Troubleshooting
15
IInput/Output Powered Extension Units
16
Input/Output Extension Blocks
17
Extension Power Supply Unit
18
Other Extension Units and Options
19
Display Module
20
Terminal Block
19.7.3 Monitor screen & status display
→ Refer to Section 19.21 for the procedure used to display the current values as hexadecimal values.
1. Data register [D (16-bit)] / extended register [R (16-bit)] / extended file register [ER (16-bit)]
2. Data register [DD (32-bit)] / extended register [DR (32-bit)] / extended file register [DER (32-bit)]
File register (D):
The file register (D) current value cannot be directly monitored at the
display module.
3. Timer (T)
Display Content
[1]
Device No.
[2]
Current value
Display Content
[1]
Device No.
[Upper 16-bit device No. (odd number)]
[Lower 16-bit device No. (even number)]
[2]
Current value
Display Content
[1]
Device No.
[2]
Contact image
ON: 
OFF: Blank
[3]
Reset image
ON: 
OFF: Blank
[4]
Current value
[5]
Setting value or device specified by setting value (if an index
modifier is present, the index register’s device is also displayed).
[6]
Current value of device specified by setting value.
D0 0
D1 0
D2 0
D3 0
[2]
[1]
D1
0
D3
0
[2]
[1]
2
0D
D
0
[1]
0
R
T0 P
001
0
R
T1 P
0
D
0001
[2]
[3]
[2] [3]
[4]
[5]
[4]
[5]
[6]

Mitsubishi FX3U Series Specifications

General

Brand	Mitsubishi
Model	FX3U Series
Category	Controller
Language	English