USER PROGRAM MODE 20 June 2005
5-138
5.6 USER PROGRAM MODE
The user program (UP) mode is accessed by users and operators, and by sales
and service staff. UP mode is used to input the copier’s default settings. The
default settings can be reset at any time by the user. ( 5.2.11)
5.6.1 HOW TO USE UP MODE
UP Mode Initial Screen: User Tools/Counter Display
To enter the UP mode, press User Tools/Counter .
System Settings
In the User Tools/Counter display, press System Settings.
Click a tab to display the settings. If the Next button is lit in the lower right corner,
press to display more options. Perform the settings, press Exit to return to the User
Tools/Counter display, and then press exit to return to the copy window.
B004S505.WMF
B004S506.WMF
To Next Page
Loading...
Need help?
General