Ruijie RG-WLAN Series User Manual

Configuration Guide Configuring HTTP Service
!!!!!!!!
download 3896704 bytes
Begin to upgrade the web package...
Web package upgrade successfully.
Verification
On the PC, log in to the device through Web again and check whether the latest Web page is displayed.
 Upgrading a Web Package by Running the upgrade web Command
Scenario
Figure 6-8
Configuration
Steps
 Connect to a local PC whose IP address is 10.10.10.13 and assign an IP address 10.10.10.131 in the
same network segment to the device.
 Start the TFTP server.
A
A#configure terminal
A(config)# vlan 1
A(config-vlan)# exit
A(config)# interface vlan 1
A(config-VLAN 1)# ip address 10.10.10.131 255.255.255.0
A(config-VLAN 1)# end
A#copy tftp://10.10.10.13/web.upd flash:/web.upd
Press Ctrl+C to quit
!!!!!!!!
Accessing tftp:// 10.10.10.13/web.upd finished, 3896704 bytes prepared
Flushing data to flash:/web.upd...
Flush data done
A #upgrade web flash:/web.upd
Web package upgrade successfully.
A #
Verification
On the PC, log in to the device through Web again and check whether the latest Web page is displayed.
Common Errors

Ruijie RG-WLAN Series Specifications

General

Brand	Ruijie
Model	RG-WLAN Series
Category	Wireless Access Point
Language	English