Configuration Guide Configuring FAT APs
Verification
Run the show running-config command to check the one-key WLAN configuration.
Configuration Example
Configuring a WLAN by Using the One-Key Mode
FAT APIf one-key WLAN configuration needs to be performed on the AP equipment in a FAT AP
environment, then:
commands to perform one-key WLAN configuration on the AP equipment:
Ruijie# configure terminal
Ruijie(config)# autowifi
Run the show running-config command to check the one-key WLAN configuration.
Ruijie#show running-config
fair-schedule
!
spectral
!
cwmp
!
service dhcp
!
ip dhcp pool web_sta_pool_1
network 192.168.110.0 255.255.255.0