Ruijie RG-WLAN Series User Manual

Configuration Guide Configuring FAT APs
Usage Guide
This configuration is not supported for all APs. This configuration needs to be performed only when the
longest distance between an AP and the wireless transmission peer is greater than 1000 m. The configured
distance may be longer, but cannot be shorter than the actual distance.
Verification
 Run the show running-config command to check the configurations of RF parameters.
Configuration Example
 Configuring RF Parameters
Scenario
Figure 1-6
Configuration
Steps
 Configure a dot11radio interface on the AP equipment.

Ruijie RG-WLAN Series Specifications

General

Brand	Ruijie
Model	RG-WLAN Series
Category	Wireless Access Point
Language	English