Ruijie RG-WLAN Series User Manual

Configuration Guide Configuring Web Authentication
Verification
 Check whether the configuration is successful.
Ruijie(config)#show running-config | be wlansec 1
wlansec 1
web-auth offline-detect interval 30 flow 10000
…
1.4.43 Configuring Transparent Transmission of the 0x05 Attribute of the Portal
Protocol
Configuration Effect
 Configure transparent transmission of the 0x05 attribute of the portal protocol. After this function is enabled, the Web
authentication server supports transparent transmission of the 0x05 attribute in the following scenarios:
1. When the portal protocol of China Mobile is interworked, the Web authentication server encapsulates the error flag
into the 0x05 attribute (ErrID) and transparently transmits it to the portal server.
2. When Huawei portal protocol 2.0 is interworked, the Web authentication server encapsulates prompts from
third-party authentication device such as the RADIUS server to the 0x05 attribute (TextInfo) and transparently transmits
them to the portal server.
Notes
 This function is disabled by default.
Configuration Steps
 Optional.
 Configure this function when the ErrID (0x05) attribute specified in the portal protocol of China Mobile is required.
 Configure this function when the TextInfo (0x05) attribute specified in Huawei portal protocol 2.0 is required.
Related Commands
 Configuring Transparent Transmission of the 0x05 Attribute of the Portal Protocol in Global Configuration
Mode
Command
web-auth portal-attribute 5
Parameter
Description
N/A
Command
Mode
Global configuration mode
Usage Guide
In general, enable this function on the portal server when a device needs to upload the error flag (ErrID).

Ruijie RG-WLAN Series Specifications

General

Brand	Ruijie
Model	RG-WLAN Series
Category	Wireless Access Point
Language	English