Configuration Guide Configuring Syslog
Related Commands
Configuring Level-based Logging
logging policy module module-name [ not-lesser-than ] level direction { all | server | file | console |
monitor | buffer }
module-name: Indicates the name of the module to which the logging policy is applied.
not-lesser-than: If this option is specified, logs of the specified level or higher will be sent to the specified
destination, and other logs will be filtered out. If this option is not specified, logs of the specified level or
lower will be sent to the specified destination, and other logs will be filtered out.
level: Indicates the level of logs for which the logging policy is configured.
all: Indicates that the logging policy is applied to all logs.
server: Indicates that the logging policy is applied only to logs sent to the log server.
file: Indicates that the logging policy is applied only to logs written into log files.
console: Indicates that the logging policy is applied only to logs sent to the Console.
monitor: Indicates that the logging policy is applied only to logs sent to a remote terminal.
buffer: Indicates that the logging policy is applied only to logs stored in the buffer.
Global configuration mode
This command is used to configure logging polices to send syslogs to different destinations based on
module and severity level.
Configuration Example
Configuring Level-based Logging
It is required to configure the logging policies as follows:
1. Send logs of Level 5 or higher that are generated by the system to the Console.
2. Send logs of Level 3 or lower that are generated by the system to the buffer.
Configure the logging policies.
Ruijie# configure terminal
Ruijie(config)# logging policy module SYS not-lesser-than 5 direction console
Ruijie(config)# logging policy module SYS 3 direction buffer
Run the show running-config | include logging policy command to display the configuration.
Exit and enter global configuration mode to generate a log containing module name “SYS”. Verify that
the log is sent to the destination as configured.
To Next Page
Loading...
Need help?
General
