Ruijie RG-WLAN Series User Manual

Configuration Guide Configuring FPM
2.4.2.3 Configuration Steps
Configuring the Aging Time
 Optional configuration.
 By default, a flow entry ages within the default aging time. If the default aging time does not meet the requirement, you
can use the ip session timeout command to change it. The longer the aging time, the longer the time-to-live (TTL) of
the flow entry.
 Perform this configuration on the corresponding forwarding device.
Command Syntax
ip session timeout {icmp-closed | icmp-connected | icmp-started | rawip-closed |
rawip-connected | rawip-established | rawip-started | tcp-close-wait | tcp-closed |
tcp-established | tcp-fin-wait1 | tcp-fin-wait2 | tcp-syn-receive | tcp-syn-sent | tcp-syn-sent2 |
tcp-time-wait | udp-closed | udp-started | udp-connected | udp-established} { num }
Parameter
Description
icmp-closed: Sets the aging time of ICMP flows in closed status, which is 10 seconds by default and
ranges from 5 to 60.
icmp-connected: Sets the aging time of ICMP flows in connected status, which is 10 seconds by
default and ranges from 5 to 120.
icmp-started: Sets the aging time of ICMP flows in started status, which is 10 seconds by default and
ranges from 5 to 120.
rawip-closed: Sets the aging time of RAWIP flows in closed status, which is 10 seconds by default
and ranges from 5 to 60.
rawip-connected: Sets the aging time of RAWIP flows in connected status, which is 300 seconds by
default and ranges from 10 to 300.
rawip-established: Sets the aging time of RAWIP flows in established status, which is 300 seconds
by default and ranges from 10 to 600.
rawip-started: Sets the aging time of RAWIP flows in started status, which is 300 seconds by default
and ranges from 10 to 300.
tcp-close-wait: Sets the aging time of TCP flows in tcp-close-wait status, which is 60 seconds by
default and ranges from 10 to 120.
tcp-closed: Sets the aging time of TCP flows in tcp-closed status, which is 10 seconds by default and
ranges from 5 to 20.
tcp-established: Sets the aging time of TCP flows in tcp-established status, which is 1,800 seconds
by default and ranges from 300 to 604,800.
tcp-fin-wait1: Sets the aging time of TCP flows in tcp-fin-wait1status, which is 60 seconds by default
and ranges from 10 to 120.
tcp-fin-wait2: Sets the aging time of TCP flows in tcp-fin-wait2status, which is 60 seconds by default
and ranges from 10 to 120.
tcp-syn-sent: Sets the aging time of TCP flows in tcp-syn-sent status, which is 10 seconds by default
and ranges from 5 to 30.
tcp-syn_sent2: Sets the aging time of TCP flows in tcp-syn_sent2 status, which is 10 seconds by
default and ranges from 5 to 30.

Ruijie RG-WLAN Series Specifications

General

Brand	Ruijie
Model	RG-WLAN Series
Category	Wireless Access Point
Language	English