CHAS
4-64
STEERING
STEERING REMOVAL
1. Park the motorcycle on a level surface.
2. Raise the front wheel placing a suitable sup-
port under the engine.
3. Remove:
•
Front wheel
Refer to “FRONT WHEEL-REMOVAL”
section.
•
Front fork
Refer to “FRONT FORK-REMOVAL” sec-
tion.
4. Remove:
•
Front fender
•
Cowling
•
Handlebar
•
Meter assembly
Ring nut wrench (3):
90890-01348
5. Remove:
•
Steering axle nut (1)
Use the ring nut wrench (3).
WARNING
Support the motorcycle securely to prevent it
falling over.
6. Remove:
•
Ring nut (upper) (1)
•
Use the ring nut wrench (2)
Ring nut wrench (2):
90890-01268
To Next Page
Loading...
Need help?
General
