SUCTION HOSE AND MANIFOLD INSPECTION/
FUEL LINE INSPECTION
3-28
INSP
ADJ
SUCTION HOSE AND MANIFOLD INSPECTION
1. Remove:
•
Seat
•
Fuel tank
See section “SEAT, FUEL TANK AND
REAR COWLING”.
2. Inspect:
•
Suction hoses (1)
Cracked/damaged ➔ Replace.
Screw (2) (carburetor manifold):
10 Nm (1.0 mkg)
Screw (3) (clamp):
2 Nm (0.2 mkg)
3. Reassemble:
•
Fuel tank
•
Seat
See section “SEAT, FUEL TANK AND
REAR COWLING”.
FUEL LINE INSPECTION
1. Inspect:
•
Fuel pipe (1)
Cracked/Damaged ➔ Replace.
Seat screws:
10 Nm (1.0 mkg)
1
To Next Page
Loading...
Need help?
General
