OverviewControlsDriving hintsCommunication NavigationEntertainmentMobilityReference
223
>
The duration of all calls
>
The charges for all calls, assuming the charge rate has
been set, see page 225
>
The total number of units used, if the network operator
supports this feature.
Confirm to switch to the next-higher menu level.
Resetting call duration and call charges
Call up main menu
Time, charge 6
Select and confirm
All Calls
Select and confirm.
Display shows:
All Calls
20:00 Min13.60 DEM
Select to reset the values to 0.
You are now requested to enter PIN2.
Display shows:
Enter PIN2
Enter PIN2
to confirm.
The values for the total call duration and the total charges
are reset to 0.
Activating automatic charge display
If you wish to have the duration and charges incurred
displayed automatically after every call:
Call up main menu
Time, charge 6
Select and confirm
AutoCharge Disp
Select and confirm.
Display shows:
AutoCharge Disp Off
Select.
Display shows:
AutoCharge Disp
✓
On
to confirm.
Display shows:
✓
AutoCharge Disp
Proceed similarly to switch off the automatic charge
display.
Switching on 1 minute beep
To hear a reminder signal every minute during a call:
Call up main menu
Time, charge 6
Select and confirm
ba.book Page 223 Thursday, December 19, 2002 8:13 PM