OverviewControlsDriving hintsCommunication NavigationEntertainmentMobilityReference
279
1
Low-beam headlights
2
High-beam headlights and side lights
halogen
Press the tongue down, see arrows.
The bulb is pressurised, so wear
goggles and gloves. There is other-
wise a risk of physical injury if the bulb
should be damaged.
<
Low-beam headlights
H7 bulb, 55 Watt
High-beam headlights
H7 bulb, 55 Watt
The H7 bulb is pressurised, so wear
goggles and gloves. There is other-
wise a risk of injury if the bulb should be
damaged.
<
1. Remove the cover
2. Turn the bulb holder to the left and take
it off
3. Pull out the bulb and change it.
Xenon headlights
*
The operating life of these light units is
extremely long and the likelihood of failure
very low, provided that they are not
switched on and off a very great number of
times. If a xenon headlight should none the
less fail, switch on the fog lights and
continue the journey with great care,
provided that local legislation does not
prohibit this.
In view of risk of potentially fatal acci-
dents resulting from the high elec-
trical voltages that are present, work on the
xenon lighting system including bulb
changing should only be performed by
specialist personnel.
<
3 Side and parking lights halogen
5WattbulbW5W
1. Pull out the bulb holder
2. Pull out the bulb and change it.
Side and parking lights xenon
*
If a fault occurs, please consult BMW
Service.
Front flashing turn indicator
Two 21 Watt bulbs P 21 W
3. Turn the bulb holder to the left and take
it off
4. Press the bulb in slightly and turn to the
left, take out and renew.
Side turn indicator repeaters
ba.book Page 279 Thursday, December 19, 2002 8:13 PM
To Next Page
Loading...
Need help?
General
