Adjusting
46
Removing and fitting mechanical
head restraints
Removing
1. Pull up the head restraint as far as the
limit position
2. Press the button, arrow
1
, and remove
the head restraint.
Installing
1. Press the button, arrow
1
, and push the
head restraint into the socket
2. Adjust the headrestraint to the preferred
position.
Comfort seat at rear
*
Height adjustment
Correct the height of the head restraint to
ensure that its centre is approximately at
ear level.
The outer head restraints are
extended automatically as soon as
the rear seat detects an occupant. You can
in addition adjust the height of the head
restraint manually.
<
Ensure that the space above the head
restraints is clear, otherwise persons
could be injured or objects damaged when
the head restraints are extended.
<
Adjusting side sections
The side sections of the head restraint's
front piece can be folded forward to
provide greater lateral support in the rest
position.
Seat belts
Always fasten your seat belt on every
journey, despite the presence of an airbag:
the airbags are a complementary safety
feature, not a substitute for the seat belts.
Fastening
The seat belt buckle must be heard to
engage.
ba.book Page 46 Thursday, December 19, 2002 8:13 PM
To Next Page
Loading...
Need help?
General
