5
Keeping the right edge of the paper aligned with the exten-
ded line of the paper alignment line (a) on the right side of
the printer and the position from which to start printing
aligned with the groove (b) at the far end of the platen, load
the paper.
6
Lower the Release Lever and close the Top Cover.
Removing Sheets
Removing Sheets
Remove sheets from the printer as follows.
1
On the Tab Selection screen of the Control Panel, press ◀ or ▶ to
select the Paper tab ( ).
Note
•
If the Tab Selection screen is not displayed, press the Menu button.
2
Press the OK button.
The Paper Menu is displayed.
3
Press ▲ or ▼ to select Eject Paper, and then press the OK button.
4
Press ▲ or ▼ to select Cut Sheet, and then press the OK button.
iPF830
Removing Sheets
User's Guide
Handling and Use of Paper Handling sheets
357