Canon imagePROGRAF iPF830 User Manual

Messages regarding ink
Messages regarding ink
Ink insufficient. ................................................................................................................................................ 649
No ink left. ...................................................................................................................................................... 649
Remaining level of the ink cannot be correctly detected. Check ink tank. ........................................................649
Close Ink Tank Cover ...................................................................................................................................... 649
Ink tank is empty. ........................................................................................................................................... 649
Not much ink is left. ........................................................................................................................................ 650
No ink tank loaded. ........................................................................................................................................ 650
The following ink tanks cannot be recognized. ................................................................................................ 650
Wrong ink tank. .............................................................................................................................................. 650
Ink insufficient.
Ink insufficient.
Cause Corrective Action
The ink level is low, so you cannot print, clean the Printhead, or do
other operations that require ink.
There is not enough ink of the color with × displayed above the re-
maining ink indicator.
Press the OK button, open the Ink Tank Cover, and replace
the Ink Tank for the color that does not have enough ink.
(See "Replacing Ink Tanks.") ➔P.566
No ink left.
No ink left.
Cause Corrective Action
There is no ink left.
There are no ink colors with × displayed above the
remaining ink indicator.
Press the OK button, open the Ink Tank Cover, and replace the Ink Tank for the
color that is out of ink.
(See "Replacing Ink Tanks.") ➔P.566
Remaining level of the ink cannot be correctly detected. Check ink tank.
Remaining level of the ink cannot be correctly detected. Check ink tank.
Cause Corrective Action
Ink level detection cannot work correctly
if you use refill ink tanks.
The refill ink tank can no longer be used. See the section Ink level detection and take
the appropriate action. (See "Ink Level Detection.") ➔P.633
Close Ink Tank Cover
Close Ink Tank Cover
Cause Corrective Action
The Ink Tank Cover is open. Close the Ink Tank Cover.
Ink tank is empty.
Ink tank is empty.
Cause Corrective Action
There is no ink left in an ink tank.
There are no ink colors with × displayed above the remaining ink indi-
cator in the Ink tab top screen.
(See "Checking Ink Tank Levels.") ➔P.575
Open the Ink Tank Cover, and replace the Ink Tank for the
color that is out of ink.
(See "Replacing Ink Tanks.") ➔P.566
iPF830
Ink insufficient.
User's Guide
Error Message Messages regarding ink
649

Canon imagePROGRAF iPF830 Specifications

General

Color	Yes
Printing colors	Black, Cyan, Magenta, Matte black, Yellow
Print technology	Inkjet
Maximum resolution	2400 x 1200 DPI
Number of print cartridges	5
Page description languages	GARO, HP-GL/2, HP-RTL
Minimum line width	0.02 mm
Number of power supply units	1
Compliance industry standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x, IEEE 802.3az
Media thickness	0.07 - 0.8 mm
Maximum print size	A0 (841 x 1189 mm)
Maximum roll length	18 m
Media width (sheets)	1117.6 mm
Maximum roll diameter	150 mm
ISO A-series sizes (A0...A9)	A0, A1
JIS B-series sizes (B0...B9)	B0, B2
Display	LCD
Product color	Black, Grey
Storage media	HDD
Internal storage capacity	320 GB
Sound power level (standby)	35 dB
Sound pressure level (printing)	52 dB
USB connector	USB Type-A
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet interface type	Gigabit Ethernet
Power supply	190 W
Power consumption (off)	0.5 W
Power consumption (standby)	5 W
Operating temperature (T-T)	15 - 30 °C
Operating relative humidity (H-H)	10 - 80 %
Sustainability certificates	ENERGY STAR

Weight and Dimensions

Depth	975 mm
Width	1893 mm
Height	1144 mm