Canon imagePROGRAF iPF830 User Manual

Messages regarding paper
Messages regarding paper
MediaType Mismatch ...................................................................................................................................... 640
PaprTypeMismatch ......................................................................................................................................... 640
The paper is too small. ................................................................................................................................... 641
The paper is too small. ................................................................................................................................... 641
PaprWidth Mismatch ...................................................................................................................................... 641
Paper size not detected. ................................................................................................................................. 642
Insufficient paper for job ................................................................................................................................. 642
This paper cannot be used as size is not supported. ...................................................................................... 643
Roll printing is selected. .................................................................................................................................. 643
Roll printing is selected, but sheets are loaded. .............................................................................................. 643
The roll is empty. ............................................................................................................................................ 643
Sheet removed. .............................................................................................................................................. 644
Sheet printing is selected. ............................................................................................................................... 644
Regular printing is selected, but a roll is loaded. ............................................................................................. 644
Paper jam. ...................................................................................................................................................... 645
Paper loaded askew. ...................................................................................................................................... 645
Paper cutting failed. ........................................................................................................................................ 645
End of paper feed. .......................................................................................................................................... 646
Rel lever is in wrong position. ......................................................................................................................... 646
Rewinding error. ............................................................................................................................................. 646
Media take-up unit ready. ............................................................................................................................... 646
Turn on the media take-up unit. ...................................................................................................................... 647
Borderless printng not possible. ..................................................................................................................... 647
Paper position not suitable for borderless printing. ......................................................................................... 647
MediaType Mismatch
MediaType Mismatch
Cause Corrective Action
You tried to print a test pattern for printer ad-
justment on several sheets, but sheets of dif-
ferent types of paper were used.
When printing a test pattern for adjustment, use sheets of the same type of paper,
in the required quantity. Replace the paper as follows and perform adjustment
again.
1.
Lift the Release Lever and stop printing.
2. Replace the paper.
(See "Loading and Printing on Sheets.") ➔P.20
3. Execute adjustment again from the control panel menu.
When Detect Mismatch in the Control Panel
menu is set to Warning, the type of paper loa-
ded does not match the type specified in the
printer driver.
You can continue to print, but note that this error may cause paper jams or prob-
lems in the printing results.
PaprTypeMismatch
PaprTypeMismatch
Cause Corrective Action
When Detect Mismatch in the Control Pan-
el menu is set to Pause, the type of paper
loaded does not match the type specified in
the printer driver.
Follow these steps to ensure the paper type matches on the printer and in the printer
driver.
1.
Press ▲ or ▼ to select Stop Printing, and then press the OK button.
2. Change the paper type setting in the printer driver to the type loaded in the printer
and try printing again.
Follow these steps to ensure the paper type matches on the printer and in the printer
driver.
MediaType Mismatch iPF830
User's Guide
Error Message Messages regarding paper
640

Canon imagePROGRAF iPF830 Specifications

General

Color	Yes
Printing colors	Black, Cyan, Magenta, Matte black, Yellow
Print technology	Inkjet
Maximum resolution	2400 x 1200 DPI
Number of print cartridges	5
Page description languages	GARO, HP-GL/2, HP-RTL
Minimum line width	0.02 mm
Number of power supply units	1
Compliance industry standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x, IEEE 802.3az
Media thickness	0.07 - 0.8 mm
Maximum print size	A0 (841 x 1189 mm)
Maximum roll length	18 m
Media width (sheets)	1117.6 mm
Maximum roll diameter	150 mm
ISO A-series sizes (A0...A9)	A0, A1
JIS B-series sizes (B0...B9)	B0, B2
Display	LCD
Product color	Black, Grey
Storage media	HDD
Internal storage capacity	320 GB
Sound power level (standby)	35 dB
Sound pressure level (printing)	52 dB
USB connector	USB Type-A
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet interface type	Gigabit Ethernet
Power supply	190 W
Power consumption (off)	0.5 W
Power consumption (standby)	5 W
Operating temperature (T-T)	15 - 30 °C
Operating relative humidity (H-H)	10 - 80 %
Sustainability certificates	ENERGY STAR

Weight and Dimensions

Depth	975 mm
Width	1893 mm
Height	1144 mm