Canon imagePROGRAF iPF830 User Manual

Messages regarding HP-GL/2
Messages regarding HP-GL/2
This type of paper is not compatible with HP-GL/2. ........................................................................................ 656
GL2: Wxxxx The memory is full. (xxxx is 0501, 0903, or 0904) ....................................................................... 656
GL2: W0502 The parameter is out of range. ................................................................................................... 656
GL2: W0504 This command is not supported. ............................................................................................... 656
This type of paper is not compatible with HP-GL/2.
This type of paper is not compatible with HP-GL/2.
Cause Corrective Action
The printer has received a HP-GL/2 print job
that cannot be printed on the paper that has
been advanced.
Follow these steps to replace the type of paper in the printer.
1. Press ▲ or ▼ to select Change Paper, and then press the OK button.
2. Replace the paper with a type compatible with HP-GL/2. For details on paper
compatible with HP-GL/2, refer to the Paper Reference Guide.
(See "Displaying the Paper Reference Guide.") ➔P.323
Press ▲ or ▼ to select Stop Printing, and then press the OK button.
Press ▲ or ▼ to select Print, and then press the OK button to resume printing. How-
ever, note that this error may cause paper jams and affect the printing quality.
GL2: Wxxxx The memory is full. (xxxx is 0501, 0903, or 0904)
GL2: Wxxxx The memory is full. (xxxx is 0501, 0903, or 0904)
Cause Corrective Action
The printer memory is
full.
Because the entire print job could not be received, the printer may not be able to print the entire original.
Check the printing results.
In the Control Panel menu, setting On-the-Fly to On may enable printing. However, check the printing
results because the image may be incomplete in some cases.
GL2: W0502 The parameter is out of range.
GL2: W0502 The parameter is out of range.
Cause Corrective Action
A parameter specified in a HP-GL/2 command is out of the suppor-
ted range.
Check the print job.
If you have specified ProcessingOption > Warning > On in
the Control Panel menu, set it to Off instead.
GL2: W0504 This command is not supported.
GL2: W0504 This command is not supported.
Cause Corrective Action
The printer has received an unsupported HP-GL/2 com-
mand.
Check the print job.
If you have specified ProcessingOption > Warning > On in the
Control Panel menu, set it to Off instead.
This type of paper is not compatible with HP-GL/2.
iPF830
User's Guide
Error Message Messages regarding HP-GL/2
656

Canon imagePROGRAF iPF830 Specifications

General

Color	Yes
Printing colors	Black, Cyan, Magenta, Matte black, Yellow
Print technology	Inkjet
Maximum resolution	2400 x 1200 DPI
Number of print cartridges	5
Page description languages	GARO, HP-GL/2, HP-RTL
Minimum line width	0.02 mm
Number of power supply units	1
Compliance industry standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x, IEEE 802.3az
Media thickness	0.07 - 0.8 mm
Maximum print size	A0 (841 x 1189 mm)
Maximum roll length	18 m
Media width (sheets)	1117.6 mm
Maximum roll diameter	150 mm
ISO A-series sizes (A0...A9)	A0, A1
JIS B-series sizes (B0...B9)	B0, B2
Display	LCD
Product color	Black, Grey
Storage media	HDD
Internal storage capacity	320 GB
Sound power level (standby)	35 dB
Sound pressure level (printing)	52 dB
USB connector	USB Type-A
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet interface type	Gigabit Ethernet
Power supply	190 W
Power consumption (off)	0.5 W
Power consumption (standby)	5 W
Operating temperature (T-T)	15 - 30 °C
Operating relative humidity (H-H)	10 - 80 %
Sustainability certificates	ENERGY STAR

Weight and Dimensions

Depth	975 mm
Width	1893 mm
Height	1144 mm