Canon imagePROGRAF iPF830 User Manual

Other problems
Other problems
The printer does not go on ............................................................................................................................. 632
Cannot operate from the Control Panel .......................................................................................................... 632
The printer takes time to start up .................................................................................................................... 632
If the Printer Makes a Strange Sound ............................................................................................................. 633
Messages advising to check the maintenance cartridge are not cleared ......................................................... 633
The printer consumes a lot of ink .................................................................................................................... 633
Ink Level Detection ......................................................................................................................................... 633
The printer does not go on
The printer does not go on
Cause Corrective Action
The printer is unplugged. Plug the power cord into the outlet, and then turn on the printer.
The specified voltage is not supplied. Check the voltage of the outlet and breaker.
(See "Specifications.") ➔P.660
Cannot operate from the Control Panel
Cannot operate from the Control Panel
Cause Corrective Action
The control panel access lock is set. Release the control panel access lock.
(See "Setting Control panel access lock.") ➔P.458
The printer takes time to start up
The printer takes time to start up
Cause Corrective Action
The printer may have shut down incorrectly last time. This may hap-
pen after power outages or if the printer is unplugged before it is
turned off.
In this case, the next time power is restored, the printer's hard disk is
checked, and startup may take some time.
Please wait a while, because it may take several minutes to
finish checking the hard disk.
If an error message is displayed after the hard disk check,
follow the instructions indicated to resolve the problem.
The printer does not go on
iPF830
User's Guide
Troubleshooting Other problems
632

Canon imagePROGRAF iPF830 Specifications

General

Color	Yes
Printing colors	Black, Cyan, Magenta, Matte black, Yellow
Print technology	Inkjet
Maximum resolution	2400 x 1200 DPI
Number of print cartridges	5
Page description languages	GARO, HP-GL/2, HP-RTL
Minimum line width	0.02 mm
Number of power supply units	1
Compliance industry standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x, IEEE 802.3az
Media thickness	0.07 - 0.8 mm
Maximum print size	A0 (841 x 1189 mm)
Maximum roll length	18 m
Media width (sheets)	1117.6 mm
Maximum roll diameter	150 mm
ISO A-series sizes (A0...A9)	A0, A1
JIS B-series sizes (B0...B9)	B0, B2
Display	LCD
Product color	Black, Grey
Storage media	HDD
Internal storage capacity	320 GB
Sound power level (standby)	35 dB
Sound pressure level (printing)	52 dB
USB connector	USB Type-A
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet interface type	Gigabit Ethernet
Power supply	190 W
Power consumption (off)	0.5 W
Power consumption (standby)	5 W
Operating temperature (T-T)	15 - 30 °C
Operating relative humidity (H-H)	10 - 80 %
Sustainability certificates	ENERGY STAR

Weight and Dimensions

Depth	975 mm
Width	1893 mm
Height	1144 mm