Canon imagePROGRAF iPF830 User Manual

Other Messages
Other Messages
GARO Wxxxx (x represents a number) ............................................................................................................ 657
ERROR Exxx-xxxx (x represents a letter or number) ....................................................................................... 657
Hardware error. xxxxxxxx-xxxx (x represents a letter or number) ..................................................................... 657
Top cover is open. .......................................................................................................................................... 657
Prepare for parts replacement. ....................................................................................................................... 658
Parts replacement time has passed. ............................................................................................................... 658
Unknown file. .................................................................................................................................................. 658
Multi-sensor error ........................................................................................................................................... 658
GARO Wxxxx (x represents a number)
GARO Wxxxx (x represents a number)
Cause Corrective Action
There is a problem with the print job. Try printing again, using the correct printer driver.
It is also possible to continue printing in this state.
However, you may not be able to obtain the desired printing results.
ERROR Exxx-xxxx (x represents a letter or number)
ERROR Exxx-xxxx (x represents a letter or number)
Cause Corrective Action
An error requiring service may have occurred. Write down the error code and message, turn off the printer, and contact your Can-
on dealer for assistance.
Hardware error. xxxxxxxx-xxxx (x represents a letter or number)
Hardware error. xxxxxxxx-xxxx (x represents a letter or number)
Cause Corrective Action
The last portion of roll paper was used during a print job. The paper
was not advanced because the trailing edge is taped to the roll.
Turn off the printer and remove the roll from the printer before
restoring power.
Fastening tape or the Belt Stopper has not been removed inside
the Top Cover.
Turn off the printer, open the Top Cover and remove the tape
or the Belt Stopper before restoring power.
An error requiring service may have occurred. Turn off the printer and wait at least three seconds before re-
storing the power.
If the message is displayed again, write down the error code
and message, turn off the printer, and contact your Canon
dealer for assistance.
Top cover is open.
Top cover is open.
Cause Corrective Action
The printer has detected that the Top Cover is
open.
Open the Top Cover fully, remove any foreign objects, and close the Top Cover
again.
If the error occurs again, close the Top Cover, turn off the printer, and wait a while
before restoring power.
iPF830
GARO Wxxxx (x represents a number)
User's Guide
Error Message Other Messages
657

Canon imagePROGRAF iPF830 Specifications

General

Color	Yes
Printing colors	Black, Cyan, Magenta, Matte black, Yellow
Print technology	Inkjet
Maximum resolution	2400 x 1200 DPI
Number of print cartridges	5
Page description languages	GARO, HP-GL/2, HP-RTL
Minimum line width	0.02 mm
Number of power supply units	1
Compliance industry standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x, IEEE 802.3az
Media thickness	0.07 - 0.8 mm
Maximum print size	A0 (841 x 1189 mm)
Maximum roll length	18 m
Media width (sheets)	1117.6 mm
Maximum roll diameter	150 mm
ISO A-series sizes (A0...A9)	A0, A1
JIS B-series sizes (B0...B9)	B0, B2
Display	LCD
Product color	Black, Grey
Storage media	HDD
Internal storage capacity	320 GB
Sound power level (standby)	35 dB
Sound pressure level (printing)	52 dB
USB connector	USB Type-A
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet interface type	Gigabit Ethernet
Power supply	190 W
Power consumption (off)	0.5 W
Power consumption (standby)	5 W
Operating temperature (T-T)	15 - 30 °C
Operating relative humidity (H-H)	10 - 80 %
Sustainability certificates	ENERGY STAR

Weight and Dimensions

Depth	975 mm
Width	1893 mm
Height	1144 mm