Using imagePROGRAF Printmonitor
Manage jobs as needed on the Driver sheet. For details, see "Job Management Using imagePROGRAF Printmoni-
tor." ➔ P.500
Printing Saved Jobs
Printing Saved Jobs
Print saved print jobs stored on the printer's hard disk as follows.
These operations are available from the Control Panel or in RemoteUI, imagePROGRAF Status Monitor, and im-
agePROGRAF Printmonitor.
Using the Control Panel
1
On the Tab Selection screen of the Control Panel, press ◀ or ▶ to
select the Job tab ( ).
Note
•
If the Tab Selection screen is not displayed, press the Menu button.
2
Press the OK button.
The Job Menu menu is displayed.
3
Press ▲ or ▼ to select Stored Job, and then press the OK button.
4
Press ▲ or ▼ to select the box number (in the range 00–29), and then press the OK button.
Note
•
Enter a password if one has been set, and then press the OK button.
iPF830
Printing Saved Jobs
User's Guide
Print Job Management Basic Print Job Operations
521