Canon imagePROGRAF iPF830 User Manual

Wheeled Output Stacker
Wheeled Output Stacker
An output stacker with casters, positioned in front of the printer.
d
c
ba
a Output Stacker
A cloth tray that catches ejected documents.
The Output Stacker can be opened and closed using the rod in front.
b
Output Stacker Ejection Guides
Prevent printed documents from winding around the Roll Holder or being drawn into the Paper Feed Slot.
Hold the Wheeled Output Stacker by these guides when moving it.
c Output Stacker Foot Stand
Equipped with casters to facilitate moving it.
d
Stopper
Locks the Stand casters.
Always release the Stopper before moving the printer. Moving the printer while the Stopper is locked may scratch the casters
or the floor.
Note
• For instructions on assembling the Wheeled Output Stacker, see the setup guide provided with the Wheeled Out-
put Stacker.
• The printer can be used with either a Stationary Output Stacker or a separate, mobile Wheeled Output Stacker.
The Wheeled Output Stacker is normally provided as an optional accessory, but it may be the standard stacker in
some sales regions. If the Wheeled Output Stacker has been provided as the standard stacker, the Stationary Out-
put Stacker is not included.
For more information about the Stationary Output Stacker, see "Stationary Output Stacker." ➔ P.467
Using the Wheeled Output Stacker
Using the Wheeled Output Stacker
Positioning the Wheeled Output Stacker by the printer will prevent rolls from dropping on the floor after printing.
The stacker is equipped with casters to facilitate moving it.
Important
•
The Output Stacker can accommodate one sheet. When printing multiple pages, remove each sheet after it is
printed.
Wheeled Output Stacker iPF830
User's Guide
Handling and Use of Paper Output Stacker
362

Canon imagePROGRAF iPF830 Specifications

General

Color	Yes
Printing colors	Black, Cyan, Magenta, Matte black, Yellow
Print technology	Inkjet
Maximum resolution	2400 x 1200 DPI
Number of print cartridges	5
Page description languages	GARO, HP-GL/2, HP-RTL
Minimum line width	0.02 mm
Number of power supply units	1
Compliance industry standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x, IEEE 802.3az
Media thickness	0.07 - 0.8 mm
Maximum print size	A0 (841 x 1189 mm)
Maximum roll length	18 m
Media width (sheets)	1117.6 mm
Maximum roll diameter	150 mm
ISO A-series sizes (A0...A9)	A0, A1
JIS B-series sizes (B0...B9)	B0, B2
Display	LCD
Product color	Black, Grey
Storage media	HDD
Internal storage capacity	320 GB
Sound power level (standby)	35 dB
Sound pressure level (printing)	52 dB
USB connector	USB Type-A
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet interface type	Gigabit Ethernet
Power supply	190 W
Power consumption (off)	0.5 W
Power consumption (standby)	5 W
Operating temperature (T-T)	15 - 30 °C
Operating relative humidity (H-H)	10 - 80 %
Sustainability certificates	ENERGY STAR

Weight and Dimensions

Depth	975 mm
Width	1893 mm
Height	1144 mm