Canon imagePROGRAF iPF830 User Manual

The printer stops during a print job
The printer stops during a print job
An error message is shown on the Display Screen ......................................................................................... 618
The printer ejects blank, unprinted paper ........................................................................................................ 618
The printer stops when printing a HP-GL/2 job (the carriage stops moving) .................................................... 631
An error message is shown on the Display Screen
An error message is shown on the Display Screen
Cause Corrective Action
The last portion of roll paper was used during a print job, and paper could
not be advanced because the trailing edge is taped to the roll.
Remove the used roll and insert a new roll.
(See "Removing the Roll from the Printer.") ➔P.338
(See "Removing the Roll Holder from Rolls.") ➔P.340
(See "Loading and Printing on Rolls.") ➔P.18
The printer ejects blank, unprinted paper
The printer ejects blank, unprinted paper
Cause Corrective Action
The leading edge of the roll paper was cut to
straighten it.
The leading edge of rolls may be cut to straighten it if Trim Edge First is set to a
value other than Off in the Control Panel menu.
(See "Cutting the Leading Edge of Roll Paper Automatically.") ➔P.350
The Printhead nozzles are clogged. Print a test pattern to check the nozzles and make sure the Printhead is in good
condition for printing.
(See "Checking for Nozzle Clogging.") ➔P.577
A print job was received from an incompatible
printer driver.
Use the correct imagePROGRAF printer driver for the printer and try printing again.
The printer has received print data that in-
cludes HP RTL commands when Auto Ro-
tate is On in the Control Panel menu.
In the Control Panel, set Auto Rotate to Off and print again.
(See "Menu Settings.") ➔P.442
The printer is damaged. Contact your Canon dealer for assistance.
An error message is shown on the Display Screen iPF830
User's Guide
Troubleshooting The printer stops during a print job
618

Canon imagePROGRAF iPF830 Specifications

General

Color	Yes
Printing colors	Black, Cyan, Magenta, Matte black, Yellow
Print technology	Inkjet
Maximum resolution	2400 x 1200 DPI
Number of print cartridges	5
Page description languages	GARO, HP-GL/2, HP-RTL
Minimum line width	0.02 mm
Number of power supply units	1
Compliance industry standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x, IEEE 802.3az
Media thickness	0.07 - 0.8 mm
Maximum print size	A0 (841 x 1189 mm)
Maximum roll length	18 m
Media width (sheets)	1117.6 mm
Maximum roll diameter	150 mm
ISO A-series sizes (A0...A9)	A0, A1
JIS B-series sizes (B0...B9)	B0, B2
Display	LCD
Product color	Black, Grey
Storage media	HDD
Internal storage capacity	320 GB
Sound power level (standby)	35 dB
Sound pressure level (printing)	52 dB
USB connector	USB Type-A
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet interface type	Gigabit Ethernet
Power supply	190 W
Power consumption (off)	0.5 W
Power consumption (standby)	5 W
Operating temperature (T-T)	15 - 30 °C
Operating relative humidity (H-H)	10 - 80 %
Sustainability certificates	ENERGY STAR

Weight and Dimensions

Depth	975 mm
Width	1893 mm
Height	1144 mm