Canon imagePROGRAF iPF830 User Manual

Printer status and modes
The printer has the following status.
Standby The printer is ready to receive jobs sent from the computer. Jobs sent from the computer are printed
immediately.
Printing Paused Printing is paused on the printer. Any jobs sent from the computer are held without being printed.
Printing The printer is printing a print job. When a print job is received from the computer, printing starts after
the currently printing print job has printed.
The time left until printing is finished is indicated in the upper-right corner in the middle line of the
display (values exceeding 10 hours are not shown).
The job name and the information about the paper of the currently printing job appear at the bottom
line of the display.
Sleep The printer is in power-saving mode. The printer automatically enters Sleep mode to conserve power
when idle for a specific period (by default, five minutes), that is, if no print jobs are received or buttons
are pressed while all covers are closed.
You can specify the period before the printer enters Sleep mode in the Sleep Timer menu. (See
"Menu Settings.") ➔P.442
After entering Sleep mode from Standby mode, the printer automatically recovers if print jobs are re-
ceived, and the jobs are printed.
Off The printer is not on.
If no operations are performed on the printer for the duration of the time set in Shut Down Timer after
entering Sleep mode, the printer automatically turns off. (See "Menu Settings.") ➔P.442
Error The printer requires your attention. Any jobs sent from the computer cannot be processed. The tab
related to the error is displayed.
For information about the display in the case of multiple errors, see "Display Transitions in Error Sta-
tus."
OK
Replace ink tank.
No ink left.
C M Y
M
B
K
B
K
iPF830 Control Panel Display
User's Guide
Control Panel Operations and Display Screen
425

Canon imagePROGRAF iPF830 Specifications

General

Color	Yes
Printing colors	Black, Cyan, Magenta, Matte black, Yellow
Print technology	Inkjet
Maximum resolution	2400 x 1200 DPI
Number of print cartridges	5
Page description languages	GARO, HP-GL/2, HP-RTL
Minimum line width	0.02 mm
Number of power supply units	1
Compliance industry standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x, IEEE 802.3az
Media thickness	0.07 - 0.8 mm
Maximum print size	A0 (841 x 1189 mm)
Maximum roll length	18 m
Media width (sheets)	1117.6 mm
Maximum roll diameter	150 mm
ISO A-series sizes (A0...A9)	A0, A1
JIS B-series sizes (B0...B9)	B0, B2
Display	LCD
Product color	Black, Grey
Storage media	HDD
Internal storage capacity	320 GB
Sound power level (standby)	35 dB
Sound pressure level (printing)	52 dB
USB connector	USB Type-A
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet interface type	Gigabit Ethernet
Power supply	190 W
Power consumption (off)	0.5 W
Power consumption (standby)	5 W
Operating temperature (T-T)	15 - 30 °C
Operating relative humidity (H-H)	10 - 80 %
Sustainability certificates	ENERGY STAR

Weight and Dimensions

Depth	975 mm
Width	1893 mm
Height	1144 mm