Canon imagePROGRAF iPF830 User Manual

Line thickness is not uniform
Line thickness is not uniform
Cause Corrective Action
In the Special Settings dialog box of
the Windows printer driver, Fast
Graphic Process is set to On.
Access the printer driver Properties dialog box from Print in the File menu of the source
application, and follow these steps to print.
1. Clear the option Open Preview When Print Job Starts on the Main sheet.
2. Clear the option Page Layout on the Layout sheet.
3.
Click the Special Settings button in the Layout sheet, open the Special Settings dia-
log box, and set Fast Graphic Process to Off.
The type of paper specified in the
printer driver does not match the type
loaded in the printer.
Load paper of the same type as you have specified in the printer driver.
(See "Loading Rolls in the Printer.") ➔P.333
(See "Loading Sheets in the Printer.") ➔P.353
Make sure the same type of paper is specified in the printer driver as you have loaded in
the printer.
1. Press the Stop button and stop printing.
2. Change the type of paper in the printer driver and try printing again.
The blue Switch on the platen is set
incorrectly.
Move the Switch numbered corresponding to the size of paper for printing opposite to the ●
position.
(See "Setting the Blue Switch on the Platen.") ➔P.623
Lines are misaligned
Lines are misaligned
Cause Corrective Action
The Printhead alignment is not adjus-
ted.
Adjust the Printhead alignment.
(See "Automatic Adjustment to Straighten Lines and Colors.") ➔P.550
(See "Manual Adjustment to Straighten Lines and Colors.") ➔P.552
(See "Adjusting Line Misalignment.") ➔P.554
The type of paper specified in the print-
er driver does not match the type loa-
ded in the printer.
Load paper of the same type as you have specified in the printer driver.
(See "Loading Rolls in the Printer.") ➔P.333
(See "Loading Sheets in the Printer.") ➔P.353
Make sure the same type of paper is specified in the printer driver as you have loaded in
the printer.
1. Press the Stop button and stop printing.
2. Change the type of paper in the printer driver and try printing again.
iPF830 Line thickness is not uniform
User's Guide
Troubleshooting Problems with the printing quality
627

Canon imagePROGRAF iPF830 Specifications

General

Color	Yes
Printing colors	Black, Cyan, Magenta, Matte black, Yellow
Print technology	Inkjet
Maximum resolution	2400 x 1200 DPI
Number of print cartridges	5
Page description languages	GARO, HP-GL/2, HP-RTL
Minimum line width	0.02 mm
Number of power supply units	1
Compliance industry standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x, IEEE 802.3az
Media thickness	0.07 - 0.8 mm
Maximum print size	A0 (841 x 1189 mm)
Maximum roll length	18 m
Media width (sheets)	1117.6 mm
Maximum roll diameter	150 mm
ISO A-series sizes (A0...A9)	A0, A1
JIS B-series sizes (B0...B9)	B0, B2
Display	LCD
Product color	Black, Grey
Storage media	HDD
Internal storage capacity	320 GB
Sound power level (standby)	35 dB
Sound pressure level (printing)	52 dB
USB connector	USB Type-A
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet interface type	Gigabit Ethernet
Power supply	190 W
Power consumption (off)	0.5 W
Power consumption (standby)	5 W
Operating temperature (T-T)	15 - 30 °C
Operating relative humidity (H-H)	10 - 80 %
Sustainability certificates	ENERGY STAR

Weight and Dimensions

Depth	975 mm
Width	1893 mm
Height	1144 mm