Cisco 4500M Command Reference

2-76
Catalyst4500 Series SwitchCiscoIOS Command Reference—Release 12.2(18)EW
78-16201-01
Chapter2 Cisco IOS Commands for the Catalyst 4500 Series Switches
debug vqpc
debug vqpc
To debug VLAN Query Protocol (VQP), use the debug vqpc command. To disable debugging output,
use the no form of this command.
debug vqpc [all | cli | events | learn | packet]
no debug vqpc [all | cli | events | learn | packet]
Syntax Description
Defaults This command has no default settings.
Command Modes Privileged EXEC
Command History
Examples This example shows how to enable all PM debugging:
Switch# debug vqpc all
Switch#
Related Commands vmps reconfirm (privileged EXEC)
all (Optional) Debugs all VQP events.
cli (Optional) Debugs VQP command line interface.
events (Optional) Debugs VQP events.
learn (Optional) Debugs VQP address learning.
packet (Optional) Debugs VQP packets.
Release Modification
12.1(13)EW Support for this command was introduced on the Catalyst 4500 series switch.

Cisco 4500M Specifications

General

Brand	Cisco
Model	4500M
Category	Network Router
Language	English