Cisco 4500M Command Reference

2-128
Catalyst4500 Series SwitchCiscoIOS Command Reference—Release 12.2(18)EW
78-16201-01
Chapter2Cisco IOS Commands for the Catalyst 4500 Series Switches
ip dhcp snooping information option
ip dhcp snooping information option
To enable DHCP option 82 data insertion, use the ip dhcp snooping information option command. To
disable DHCP option 82 data insertion, use the no form of this command.
ip dhcp snooping information option
no ip dhcp snooping information option
Syntax Description This command has no arguments or keywords.
Defaults DHCP option 82 data insertion is enabled.
Command Modes Global configuration
Command History
Examples This example shows how to enable DHCP option 82 data insertion:
Switch(config)# ip dhcp snooping information option
Switch(config)#
This example shows how to disable DHCP option 82 data insertion:
Switch(config)# no ip dhcp snooping information option
Switch(config)#
Related Commands ip dhcp snooping
ip dhcp snooping limit rate
ip dhcp snooping trust
ip dhcp snooping vlan
show ip dhcp snooping
show ip dhcp snooping binding
Release Modification
12.1(12c)EW Support for this command was introduced on the Catalyst 4500 series switch.

Cisco 4500M Specifications

General

Brand	Cisco
Model	4500M
Category	Network Router
Language	English