2-60
Catalyst4500 Series SwitchCiscoIOS Command Reference—Release 12.2(18)EW
78-16201-01
Chapter2 Cisco IOS Commands for the Catalyst 4500 Series Switches
debug platform packet protocol lacp
debug platform packet protocol lacp
To debug LACP protocol packets, use the debug platform packet protocol lacp command. To disable
debugging output, use the no form of this command.
debug platform packet protocol lacp [receive | transmit | vlan]
no debug platform packet protocol lacp [receive | transmit | vlan]
Syntax Description
Defaults This command has no default settings.
Command Modes Privileged EXEC
Command History
Examples This example shows how to enable all PM debugging:
Switch# debug platform packet protocol lacp
Switch#
Related Commands undebug platform packet protocol lacp (same as no debug platform packet protocol lacp)
receive (Optional) Enables platform packet reception debugging functions.
transmit (Optional) Enables platform packet transmission debugging functions.
vlan (Optional) Enables platform packet VLAN debugging functions.
Release Modification
12.1(8a)EW Support for this command was introduced on the Catalyst 4500 series switch.
To Next Page
Loading...
Need help?
General
