Cisco 4500M Command Reference

2-27
Catalyst4500 Series SwitchCiscoIOS Command Reference—Release 12.2(18)EW
78-16201-01
Chapter2 Cisco IOS Commands for the Catalyst 4500 Series Switches
clear ip arp inspection statistics
clear ip arp inspection statistics
To clear the dynamic ARP inspection statistics, use the clear ip arp inspection statistics command.
clear ip arp inspection statistics [vlan vlan-range]
Syntax Description
Defaults This command has no default settings.
Command Modes Privileged EXEC
Command History
Examples This example shows to clear the DAI statistics from VLAN 1:
Switch# clear ip arp inspection statistics vlan 1
Switch# show ip arp inspection statistics vlan 1
Vlan Forwarded Dropped DHCP Drops ACL Drops
---- --------- ------- ---------- ----------
1 0 0 0 0
Vlan DHCP Permits ACL Permits Source MAC Failures
---- ------------ ----------- -------------------
1 0 0 0
Vlan Dest MAC Failures IP Validation Failures
---- ----------------- ----------------------
1 0 0
Switch#
Related Commands arp access-list
clear ip arp inspection log
show ip arp inspection
vlan vlan-range (Optional) Specifies the VLAN range.
Release Modification
12.1(19)EW Support for this command was introduced on the Catalyst 4500 series switch.

Cisco 4500M Specifications

General

Brand	Cisco
Model	4500M
Category	Network Router
Language	English