Cisco 4500M Command Reference

2-227
Catalyst4500 Series SwitchCiscoIOS Command Reference—Release 12.2(18)EW
78-16201-01
Chapter2Cisco IOS Commands for the Catalyst 4500 Series Switches
redundancy
redundancy
To enter the redundancy configuration mode, use the redundancy command in the global configuration
mode.
redundancy
Syntax Description This command has no arguments or keywords.
Defaults This command has no default settings.
Command Modes Global configuration
Command History
Usage Guidelines The redundancy configuration mode is used to enter the main CPU submode.
To enter the main CPU submode, use the main-cpu command in the redundancy configuration mode.
The main CPU submode is used to manually synchronize the configurations on the two supervisor
engines.
From the main CPU submode, use the auto-sync command to enable automatic synchronization of the
configuration files in NVRAM.
Use the no command to disable redundancy. If you disable redundancy, then reenable redundancy, the
switch returns to default redundancy settings.
Use the exit command to exit the redundancy configuration mode.
Examples This example shows how to enter redundancy mode:
Switch(config)# redundancy
Switch(config-r)#
This example shows how to enter the main CPU submode:
Switch(config)# redundancy
Switch(config-red)# main-cpu
Switch(config-r-mc)#
Related Commands auto-sync
main-cpu
Release Modification
12.1(12c)EW Support for this command was introduced on the Catalyst 4500 series switch.
(Catalyst 4507R only)

Cisco 4500M Specifications

General

Brand	Cisco
Model	4500M
Category	Network Router
Language	English