Cisco 4500M Command Reference

2-53
Catalyst4500 Series SwitchCiscoIOS Command Reference—Release 12.2(18)EW
78-16201-01
Chapter2 Cisco IOS Commands for the Catalyst 4500 Series Switches
debug ip dhcp snooping event
debug ip dhcp snooping event
To debug DHCP snooping events, use the debug ip dhcp snooping event command. To disable
debugging output, use the no form of this command.
debug ip dhcp snooping event
no debug ip dhcp snooping event
Syntax Description This command has no arguments or keywords.
Defaults Debugging of snooping event is disabled.
Command Modes Privileged EXEC
Command History
Examples This example shows how to enable debugging for DHCP snooping events:
Switch# debug ip dhcp snooping event
Switch#
This example shows how to disable debugging for DHCP snooping events:
Switch# no debug ip dhcp snooping event
Switch#
Related Commands debug ip dhcp snooping packet
Release Modification
12.1(12c)EW Support for this command was introduced on the Catalyst 4500 series switch.

Cisco 4500M Specifications

General

Brand	Cisco
Model	4500M
Category	Network Router
Language	English