Cisco 4500M Command Reference

2-103
Catalyst4500 Series SwitchCiscoIOS Command Reference—Release 12.2(18)EW
78-16201-01
Chapter2 Cisco IOS Commands for the Catalyst 4500 Series Switches
hw-module power
hw-module power
To turn the power off on a slot or line module, use the no hw-module power command. To turn the power
back on, use the hw-module power command.
hw-module [slot | module] number power
no hw-module [slot | module] number power
Syntax Description
Defaults After a boot up, the power is on.
Command Modes Global configuration
Command History
Examples This example shows how to shut off power to a module in slot 5:
Switch# no hw-module slot 5 power
Switch#
Related Commands clear hw-module slot password
slot (Optional) Specifies a slot on a chassis.
module (Optional) Specifies a line module.
number (Optional) Specifies the slot or module number.
Release Modification
12.1(8a)EW Support for this command was introduced on the Catalyst 4500 series switch.
12.2(18)EW Add slot and module keywords.

Cisco 4500M Specifications

General

Brand	Cisco
Model	4500M
Category	Network Router
Language	English