Cisco 4500M Command Reference

2-187
Catalyst4500 Series SwitchCiscoIOS Command Reference—Release 12.2(18)EW
78-16201-01
Chapter2Cisco IOS Commands for the Catalyst 4500 Series Switches
name
name
To set the MST region name, use the name command. To return to the default name, use the no form of
this command.
name name
no name name
Syntax Description
Defaults The MST region name is not set.
Command Modes MST configuration
Command History
Usage Guidelines Two or more Catalyst 4500 series switches with the same VLAN mapping and configuration version
number are considered to be in different MST regions if the region names are different.
Examples This example shows how to name a region:
Switch(config-mst)# name Cisco
Switch(config-mst)#
Related Commands instance
revision
show spanning-tree mst
spanning-tree mst configuration
name Specifies the name of the MST region. The name can be any string with a maximum
length of 32 characters.
Release Modification
12.1(12c)EW Support for this command was introduced on the Catalyst 4500 series switch.

Cisco 4500M Specifications

General

Brand	Cisco
Model	4500M
Category	Network Router
Language	English