Cisco 4500M Command Reference

2-391
Catalyst4500 Series SwitchCiscoIOS Command Reference—Release 12.2(18)EW
78-16201-01
Chapter2Cisco IOS Commands for the Catalyst 4500 Series Switches
show storm-control
show storm-control
To display broadcast storm control settings on the switch or on the specified interface, use the show
storm-control user EXEC command.
show storm-control [interface-id | broadcast]
Syntax Description
Command Modes Privileged EXEC
Command History
Usage Guidelines When you enter an interface ID, the storm control thresholds are displayed for the specified interface.
If you do not enter an interface ID, settings are displayed for broadcast traffic type for all ports on the
switch.
Examples This is an example of output from the show storm-control command when no keywords are entered.
Because no traffic type keyword was entered, the broadcast storm control settings are displayed.
Switch# show storm-control
Interface Filter State Upper Lower Current
--------- ------------- ------- ------- -------
Gi2/1 Forwarding 30.00% 30.00% N/A
Gi4/1 Forwarding 30.00% 30.00% N/A
Gi4/3 Forwarding 30.00% 30.00% N/A
This is an example of output from the show storm-control command for a specified interface. Because
no traffic type keyword was entered, the broadcast storm control settings are displayed.
Switch# show storm-control fastethernet2/17
Interface Filter State Level Current
--------- ------------- ------- -------
Fa2/17 Forwarding 50.00% 0.00%
interface-id (Optional) Specifies the interface ID for the physical port.
broadcast (Optional) Displays broadcast storm threshold setting.
Release Modification
12.1(19)EW Support for this command was introduced on the Catalyst 4500 series switch.

Cisco 4500M Specifications

General

Brand	Cisco
Model	4500M
Category	Network Router
Language	English