Cisco 4500M Command Reference

2-59
Catalyst4500 Series SwitchCiscoIOS Command Reference—Release 12.2(18)EW
78-16201-01
Chapter2 Cisco IOS Commands for the Catalyst 4500 Series Switches
debug pagp
debug pagp
To debug PAgP activity, use the debug pagp command. To disable debugging output, use the no form
of this command.
debug pagp [all | event | fsm | misc | packet]
no debug pagp
Syntax Description
Defaults This command has no default settings.
Command Modes Privileged EXEC
Command History
Usage Guidelines This command is supported by the supervisor engine only and can be entered only from the switch
console.
Examples This example shows how to enable PAgP miscellaneous debugging:
Switch# debug pagp misc
Port Aggregation Protocol Miscellaneous debugging is on
Switch#
*Sep 30 10:13:03: SP: PAgP: pagp_h(Fa5/6) expired
*Sep 30 10:13:03: SP: PAgP: 135 bytes out Fa5/6
*Sep 30 10:13:03: SP: PAgP: Fa5/6 Transmitting information packet
*Sep 30 10:13:03: SP: PAgP: timer pagp_h(Fa5/6) started with interval 30000
<... output truncated...>
Switch#
Related Commands undebug pagp (same as no debug pagp)
all (Optional) Enables all PAgP debugging.
event (Optional) Enables debugging of PAgP events.
fsm (Optional) Enables debugging of the PAgP finite state machine.
misc (Optional) Enables miscellaneous PAgP debugging.
packet (Optional) Enables PAgP packet debugging.
Release Modification
12.1(8a)EW Support for this command was introduced on the Catalyst 4500 series switch.

Cisco 4500M Specifications

General

Brand	Cisco
Model	4500M
Category	Network Router
Language	English