Cisco 4500M Command Reference

2-408
Catalyst4500 Series SwitchCiscoIOS Command Reference—Release 12.2(18)EW
78-16201-01
Chapter2Cisco IOS Commands for the Catalyst 4500 Series Switches
show vmps
show vmps
To display the VLAN Query Protocol (VQP) version, reconfirmation interval, retry count, VLAN
Membership Policy Server (VMPS) IP addresses, current servers, and primary servers, use the show
vmps command.
show vmps [statistics]
Syntax Description
Defaults This command has no default settings.
Command Modes EXEC
Command History
Examples This is an example of output from the show vmps command:
Switch# show vmps
VQP Client Status:
--------------------
VMPS VQP Version: 1
Reconfirm Interval: 60 min
Server Retry Count: 3
VMPS domain server: 172.20.50.120 (primary, current)
Reconfirmation status
---------------------
VMPS Action: No Dynamic Port
Switch#
This is an example of output from the show vmps statistics command:
Switch# show vmps statistics
VMPS Client Statistics
----------------------
VQP Queries: 0
VQP Responses: 0
VMPS Changes: 0
VQP Shutdowns: 0
VQP Denied: 0
VQP Wrong Domain: 0
VQP Wrong Version: 0
VQP Insufficient Resource: 0
Switch#
Related Commands vmps reconfirm (privileged EXEC)
statistics (Optional) Displays the client side statistics.
Release Modification
12.1(13)EW Support for this command was introduced on the Catalyst 4500 series switch.

Cisco 4500M Specifications

General

Brand	Cisco
Model	4500M
Category	Network Router
Language	English