Cisco 4500M Command Reference

Chapter2Cisco IOS Commands for the Catalyst 4500 Series Switches
show access-group mode interface
2-239
Catalyst4500 Series SwitchCiscoIOS Command Reference—Release 12.2(18)EW
78-16201-01
22
show access-group mode interface
To display the ACL configuration on a Layer 2 interface, use the show mac access-group interface
command.
show access-group mode interface [interface interface-number]
Syntax Description
Defaults This command has no default settings.
Command Modes Privileged EXEC
Command History
Usage Guidelines Valid values for the port number depend on the chassis used.
Examples This example shows how to display the ACL configuration on interface fast 6/1:
Switch# show access-group mode interface fast 6/1
Interface FastEthernet6/1:
Access group mode is: merge
Related Commands access-group mode
interface (Optional) Interface type; valid values are ethernet, FastEthernet,
GigabitEthernet, and port-channel.
interface-number (Optional) Interface number.
Release Modification
12.1(19)EW Support for this command was introduced on the Catalyst 4500 series
switch.

Cisco 4500M Specifications

General

Brand	Cisco
Model	4500M
Category	Network Router
Language	English