Cisco 4500M Command Reference

2-8
Catalyst4500 Series SwitchCiscoIOS Command Reference—Release 12.2(18)EW
78-16201-01
Chapter2 Cisco IOS Commands for the Catalyst 4500 Series Switches
arp access-list
arp access-list
To define an ARP access list or add clauses at the end of a predefined list, use the arp access-list
command.
arp access-list name
Syntax Description
Defaults None
Command Modes Configuration
Command History
Examples The following example shows how to define an ARP access list named static-hosts:
Switch(config)# arp access-list static-hosts
Switch(config)#
Related Commands deny
ip arp inspection filter vlan
permit
name Specifies the access control list name.
Release Modification
12.1(19)EW Support for this command was introduced on the Catalyst 4500 series switch.

Cisco 4500M Specifications

General

Brand	Cisco
Model	4500M
Category	Network Router
Language	English